Failed or Absent Defences » Deliberate breach of safety defences

51Near Miss Electrocution



Click to view link.

Brief Description of Incident/Accident & Description of Consequences/Outcomes:

A contract fitter engaged in the repair of a dragline lower roller path entered the tub 22KV cable connection chamber with the power still connected. He had found the chamber door open and was advised by his safety representative that the area was covered by an access permit for work on the roller path. He completed the job and left the chamber without being injured.

Energy Type(s) Involved:

Direct contact with live electrical conductors

Root & Contributing Cause(s):

LTA awareness

LTA equipment design

LTA hazard identification

LTA isolation

LTA isolation procedure

LTA maintenance procedure

LTA risk assessment

LTA work method

Stated or Potential Consequence(s):

Potential Fatality

Preventative/Recommended/Accepted Steps of Risk Mitigation, Points of Interest:

Visual inspections of safety locks and other such devices should form part of regular maintenance procedures.

The poor practice of leaving the door interlock switch taped in the closed position without notification and appropriate precautions is unacceptable. This should be made clear to all electrical employees.

In planning maintenance work on draglines and other large machinery, areas to be accessed should be clearly identified, together with their points of isolation. A plan showing the various parts of draglines and other large machinery and indicating points of isolation of all energy sources to access these parts should be drawn up and used to prepare access permits.

After isolation all personnel involved in the work should be made aware of the areas to which they have access. Where necessary, other areas should be barricaded off.

Organisation:

Queensland Government Department of Employment, Economic Development and Innovation (DEEDI)


Results

Here are the results.


Information

Reference Type:

Safety Alert #CR149

Mine Type:

Surface Mine

Energy:

Electrical

Equipment:

Published:

1997

Region:

Australia, Queensland



©2018 ISOLgate